Clean Room Accessories

Stainless Steel Drains ( FLOOR DRAINS )

IEWI offer a range of floor drains suitable for light to medium duty loads, incorporate advanced designs, high quality and ease of installation - at extremely competitive prices. To complete the line of drains, IEWI offers a range of gulleys and trenches in stainless steel The unique seal design prevents foreign particles & cockroach present in the discharge pipe from entering back in to the sterile areas
Applications
Floor Drains are used for the drainage of floor areas and/or discharge of water / process liquids in: Clean Rooms, Showers ,Toilets Changing Rooms, Washdown areas, Labs. The range of Floor Drains are suitable for concrete floors or floors with tiled finishes. Designs
Drains are offered in three designs viz
1) Single seal suitable for thin slabs (first floor and higher floors ) 2) Double seal designs suitable for thick slabs (Ground floor) 3) Triple seal designs suitable for thick slabs & sewage lines (prevents back flow of effluents & poisonous fumes) Finish
The floor drains can be electropolished or chemically descaled (acid pickled) in order to enhance corrosion resistance

View Pdf Catalogue

Pendent (Service Shafts)

The Pendent is designed to facilitate various services (WFI / DM water piping loops, electrical cabling,steam / chilled water lines, nitrogen / LPG lines, process media lines, compressed air line ) to be brought into the sterile area or working area in a close nesting manner, so as to provide easy access to services
Design Features
The Pendent is designed to take mainly electrical cabling, Water, Steam and gases housed in four segments of the Pendent, isolated and independent of each other. To maintain the sterile parameter of a given area pendent enters by penetrating the false ceiling in to the area. Pendent is sealed on the outer edge of the bottom end entering the sterile area. The internals are sealed by means of rubber packing and silicon sealant at the top end after all services are installed. The bottom end is also sealed in a similar manner. This prevents cross contamination. Pendents housing can be dismantled easily by disconnecting utility piping and removed by opening of the clamp giving easy access to the internals.
Material of Construction
SS 304 / 316 / 316L, Argon welded, ground, buffed View Pdf Catalogue

Hand Sanitise Automatic IPA Dispenser

Thi Hand Sanitizer automatically dispenses disinfectant(isoproyl alcohol) onto your hands. The dispenser prevents you from touching unhygienic levers,taps knobs & soap cakes. Thus preventing cross contamination and maintaining complete cleanliness .
Operation:
Put your hand( palms facing downwards) into the unit's interior. The sensor detects your hand & automatically dispenses 0.5 ml disinfectant solution on to your palms. Rub both your palms, ipa rapidly evaporates.
Advantages:
Efficient: Pathogens of the hands are eliminated by sanitising ipa instantly.
Fast: The cleaning cycle is completed in less than 10 seconds max.
Economical: Only 0.5 ml of alcohol utilized / cycle.
Convenient: Easy to install, operate & maintain.
Durable: The body is of non-corrosive stainless steel construction.
Technical Specifications:
Electric Supply: 220 V, 60Hz Dimensions (WXDXH): 300 X 175 X 320 mm Weight: 9.25 kg. Tank Capacity: 500 ml Volume of spray /cycle: 0.5 ml

AUTOMATIC GEL DISPENSER

Thi Hand Sanitizer automatically dispenses 1 gm of sanitising gel (synthetic chemical or herbal) onto your hands. The dispenser prevents you from touching unhygienic levers,taps knobs & soap cakes. Thus preventing cross contamination and maintaining complete cleanliness
Operation:
Put your hand ( palms facing upwards) into the unit's interior. The sensor detects your hand & automatically dispenses 0.5 ml gel onto your palms. Rub both your palms, the gel rapidly dries.
Technical Specifications:
Electric Supply: 220 V, 60Hz
Dimensions (WXDXH): 200 X 200 X 285 mm Weight: 5.900 kg.
Tank Capacity: 500 ml Volume of spray/ cycle: 1.0 gm

View Pdf Catalogue

Shoe Cover Dispenser

Automatic shoe cover dispensers eliminate the problem for manual wearing shoe cover on foot and avoid carrying any contamination to clean room/ sterile areas. Suitable for pharmaceuticals, electronics, Food I, Cosmetic , Hospitals, & Allied industries.

OPERATION:
For wearing, you need to place one foot at a time in dispenser and giving a gentle press to foot, the shoe cover automatically encloses your shoe/foot without touching your hand or any external help, you need not have to bend or stand on one foot while wearing shoe cover, At any given time only one shoe cover will be dispensed. It will accommodate up to no 11 size shoe.

ADVANTAGES:
The design is user friendly, for you do not need any mechanical person for maintenance Dispenser can accommodate 60/110/220 pieces shoe cover. The shoe cover are made of plastic material with clip.

RANGE :
Model :SCD-60
Dimensions: 47 cm (l) x 28 cm(w) x 18 cm (h)
Weight:6 kg
Capacity: 60 shoe covers
Shoe Covers are available in bundle of 10 pieces
Model : SCD-100
Dimensions :70 cm (l) x 32 cm(w) x 23 cm (h)
Weight :10 kg
Capacity: 110 shoe covers
Model: SCD-200
Dimensions :74 cm (l) x 32 cm(w) x 90 cm (h)
Weight: 21 kg
Capacity: 220 shoe covers
View Pdf Catalogue

Clean Room Furniture

Industrial EquipWash Inc. offer Stainless Steel Clean Room / Change Room Furniture including Apron Cabinets, Shoe Racks, Dies & Punches Cabinets, Lockers, Sinks, Sink Tables, Hand Wash Systems, Racks, Tables, Chairs, Cross-over Bench, Multi-purpose Trolleys, Dust bins, Tubs and custom designed furniture. All furniture is fabricated from SS 304/SS 316 duly ground and buffed to pharma standards.


View Pdf Catalogue

SANITARY VENT FILTERS

Vent Filter is designed for the sterile air venting of containers and tanks. The housing are made from AISI 316 Stainless Steel, the surfaces are highly polished. Slits in the upper part of the top ensure complete drying out of the system after sterilization ( avoids problems with entrapped moisture ). The housing base has a bayonet-type hold on the upper side and a connector with female threaded nut on the underside

View Pdf Catalogue

The conical filter separates visible particles from liquids/gases.SS 316/304 quality conical filter comprises of two conical bodies, coupled with tri clamp. The filter element is a stainless steel mesh (100 # to 500 #) supported on a perforated plate and inserted in rubber seat and both being sandwiched for proper seating. Materials - All wetted parts SS316,Gaskets are Silicon, Teflon, EPDM, or Viton Connection - Tri clamp or DIN or SMS or BSP Pressure - 10.5 bars max. (150 psig)
View Pdf Catalogue

PW/WFI/PSG DISTRIBUTION SYSTEMS

IEWI design, manufacture and errect water distribution loops for PW/WFI/Pure Steam generating systems.Our scope of supply includes stainless steel pipes, fittings,valves, storage tanks and related instrumentation.We provide documentation for validation.

View Pdf Catalogue